catalogue smeyers-tu
Platform lift
Platform lift

This guidance assists in the selection of a suitable powered lifting platform
When selecting a powered lifting platform, consider if the needs of the user are likely to change in the future. Select a lifting platform with a rated load that is capable carrying the maximum foreseeable load.
Where either manual or automatic operation are optionally available for devices such as doors, barriers or hinged platforms, consider which is more appropriate for the user.

1. Control (operating) devices
Consider the position, type and number of operating controls that would suit users with different disabilities.
Consider whether a key switch, electronic card or similar means is necessary to restrict the use of lifting platforms to authorised users.

2. Location of the lifting platform
Check if the proposed location of the lifting platform is suitable. For example, check the following:
a) that the installation will not obstruct normal activities in and around the building,
b) that the site location proposed supporting structure is strong enough to support the lifting platform,
c) that adequate wheelchair manoeuvring space will be available at each landing level served (approx. 1500 x 1500 mm).

3. Electrical supply and lighting
Ensure that a suitable electrical supply is available.
Ensure that adequate lighting is available on the landings.

4. Operating/emergency instructions:
Ensure that operation of the lifting platform is demonstrated to the user and that the user is fully instructed on its safe use including
a. instructions on the correct emergency operating procedure in case of breakdown,
b. the names, addresses and telephone numbers of persons to contact for emergency services.

5. Alarm system:
Consideration should be given to the desirability of providing an alarm system.

LP11

 

GULDMANN & BARDUVA
Type LP5+ LP7+ LP8 RB150 LP50
Platform, useful 1600 x 896 mm 1600 x 900 mm 1524 x 924 mm 1100 x 1400 mm 1524 x 924 mm
Max height 830 mm 1500 mm 3000 mm 3000 mm 1000 mm
Lifting capacity 360 kg 350 kg 352 kg 400 kg 375 kg
Electrical power 230V – 17.4W 230V – 600W 230V – 550W 220-240 V, 1 phase, 25A
380-400 V, 3 phases, 16A
230V – 625W
Application private/public private/public private/public private/public private/public
Photos LP5+ LP7+ LP8 RB150 LP50

The types LP1, 5, and 8 can also be recessed into the floor. The ramp can then be shorter. Easier for the user.
The types LP1 to LP12 can be installed both indoors and outdoors. If outdoors, proper drainage of the installation pit is required.
For lifting heights above 500 mm, LP5 and LP8 are equipped with a lockable door at the top access point.

Special dimensions? Other types? Ask about it.

Standards:
ISO 9386-1: motorized lifting platforms for disabled persons.
EN 60601-1 and EN 60601-1-2: medical equipment.
2006/42/EC: Machinery Directive.

 

catalogue smeyers-tu

‘Stepless’ portable ramps are available in a broad range of shapes and designs – one of the largest selection in the industry. The ramps are used to negotiate steps and curbs, assisting wheelchair users into cars or whenever there is a need to overcome height differences.

High safety level:
– integrated anti-skid surface with a very high wear resistance,
– strong by using high grade aluminium,
– both ends are covered with non-skid surfaces to avoid slipping away and protect you car.

Maintenance free:
– made of weather resistant materials,
– easy to clean.

Recycling:
– all materials can be recycled.

New design:
– easy to use,
– soft and round handgrip for ease of use, which feels warm,
– adjustable length,
– strong, doesn’t rattle in your car during travel. Cast nylon guides provide a fluent and silent length adjustment and wipe the dust.

Choose the right type:
– the type depends of the capabilities of the user – maybe of the caregiver – and depends of the available space, the load and the height difference.
– a pair of small ramps or one wide ramp? If the wheels are not in line like on 3-wheel scooters, you should use either 3 small ramps or one wide ramp,
– a narrow or wide plain ramp longer than 1,5 m can hardly be transported in your car. choose a foldable or telescopic ramp,
– a telescopic ramp can be adjusted to a shorter length for lower heights. A foldable ramp will always need the full length,
– a “Lite” ramp weighs at most only 9,5 kg and is of course much easier to set up by the user or the companion. The maximum length is however limited to 2,05 m and consequently to 0,4 m heights.

Take the proper length:
– always select the longest possible ramp: the longer the ramp, the less the gradient to overcome.
– for an independent user of manual wheelchair we recommend a maximum slope of 1:7.
– for a manual wheelchair pushed by a helper or an electric wheelchair, the maximum slope should be 1:5.
Example: for 200 mm height difference, the ramp length should be 1 m (1:5) or 1,4 m (1:7).

reference max/min length, mm outer/inner width, mm max.load kg weight/piece kg
Plain ramp, for uniform height differences, this lightweight ramp is often used in a single location. Lowest own weight.
30000-xxx 30000-050 500 260/182 350 1,5
30000-100 1050 260/182 350 3,2
30000-130 1300 260/182 350 3,9
30000-155 1550 260/182 350 4,7
30000-200 2000 260/182 200 6,0
Telescopic ramp: flexible ramp that can be used in many places and for different level changes because their length can be adjusted. Needs less space for storing. Also available per 3 ramps for scooters!
30015-xxx 30015-100 1000/677 279/182 350 3,7
30015-150 1500/927 279/182 350 5,1
30015-200 2000/1177 279/182 350 6,6
30015-250 2500/1427 279/182 200 8,0
30015-300 3000/1677 279/182 200 9,5
Folding ramps, for uniform height differences. Compact when storing. Easier to transport than plain ramps.
30020-xxx 30020-110 1100/580 260/182 350 4,0
30020-160 1600/830 260/182 350 5,7
30020-210 2100/1080 260/182 350 7,2
30020-260 2600/1330 260/182 200 8,6
30020-310 3100/1580 260/182 200 10,1
Wide plain ramp, ideal for use when the ramp is kept permanently in place, especially when used by 3-wheeled scooters. Provides higher safety for the user and caregiver.
30030-xxx 30030-100 1000 880/770 325 9,7
30030-125 1250 880/770 325 12,1
30030-150 1500 880/770 325 14,4
30030-200 2000 880/770 325 19,1
30030-300 3000 880/770 200 28,6
Wide folding ramp, to be used in several places with about the same height like cars. Provides higher safety for the user and caregiver. Needs less space to store than the wide plain ramp.
30040-xxx 30040-150 1500/780 880/770 325 17,5
30040-200 2000/1030 880/770 325 22,2
30040-250 2500/1280 880/770 200 26,9
30040-300 3000/1530 880/770 200 31,7
EasyFold ramp. It folds once and than carried like a suitcase. Folded width = 405 mm
30085-165: 3-fold ramp with a wide driving surface which when folded takes up minimal space during transport and storage. The lock ensures that the ramp remains folded during transport. With a maximum load of 350 kg the ramp is suitable for electric wheelchairs and scooters.
30080-xxx 30080-095 935 776/760 350 7,8
30080-120 1185 776/760 350 9,0
30080-150 1485 776/760 350 11,4
30080-180 1785 776/760 350 13,4
30080-210 2085 776/760 350 15,8
30085-165 1635 776/760 350 13,4
Telescopic EasyFold ramp, easy to carry, position and unfold, due to the ease of length adjustment. Folded width = 405 mm
30070-xxx 30070-180 1830/1120 820/760 325 16,4
30070-210 2130/1270 820/760 325 18,9
30070-240 2440/1430 820/760 325 21,4
30070-300 3050/1730 820/760 200 26,4
“Lite” ramp, feather light for a trip or journey,
– no doubt this is the lightest ramp on the market, thanks to glass & graphite fibres,
– no balance problem when hung on the wheelchair,
– non-skid surface,
– single hinge, easy to handle by user or caregiver.
30100-xxx 30100-070 700 730 300 3,5
30100-000 transport bag for the 700 mm long ramp
30100-085 850 780 300 4,5
30100-125 1250 780 300 6
30100-165 1650 780 300 7,5
30100-205 2050 780 300 9,5

Other sizes for the aluminium ramps
– height of edge: 46 mm,
– angle of contact: max. 12°,
– contact surface of suitcase ramps: 90 mm,
– contact surface of other ramps: 110 mm.

CE mark
– 93/42/EC and amendments: medical devices, class 1

catalogue smeyers-tu

Various types for various applications,
For indoor or antislip versions (types “S”) for outdoor,
Width: 75 or 100 cm,
Color: grey,
Suitable for wheel chairs but also for trolleys, bicycles and other vehicles.

Stepless Excellent ramp kits are sold as kits.

They are easy to install in 10 to 15 minutes thanks to the enclosed installation guide and accessories for set up and final adjustments. The 2 upper layers are separate to achieve the exact height.

Extremely strong:
not only for wheelchairs but also for carts, tractors, lawn mowers and even a 62 tons weighing Leopard tank. Look at the movie on YouTube (3’30”).

A green and 100% non toxic product:
– made of PELD or PEHD, both polyethylene consisting exclusively of carbon and hydrogen,
– no softeners, such as phthalates or similar compounds,
– no solvents that can be released to the surroundings as VOCs (volatile organic compounds),
– no chlorine, no hydrochloric acid in the event of fire,
– PELD and PEHD can be 100% regenerated.

Built according to EN 12182, 1998: technical aids for disabled people – General requirements and test methods

Indoor use
Step height width 75 cm width 100 cm
from
0 to 2,4 cm
kit 0 : width 75 x length 12,5 x height 2,4 cm

Content of this kit:
3 ramps
3 adjustment keys
3 mounting pads
3 screws
6 F-locks
3 double adhesive tape

Excellent kit 0

kit 100 : width 100 x length 12,5 x height 2,4 cm

Content of this kit:
4 ramps
4 adjustment keys
4 mounting pads
4 screws
8 F-locks
4 double adhesive tape

Excellent kit 100

from 2,4 to 4,2 cm kit 1 : width 75 x length 25 x height 4,2 cm

Content of this kit:
2 ramp layers, individually pre-assembled
3 adjustment keys
3 mounting pads
3 screws
12 R-locks

Excellent kit 1

kit 101 : width 100 x length 25 x height 4,2 cm

Content of this kit:
4 ramps
4 adjustment keys
4 mounting pads
4 screws
8 F-locks
4 double adhesive tape

Excellent kit 101

from 4,2 to 7,8 cm kit 2 : width 75 x length 50 x height 7,8 cm

Content of this kit:
3 ramp layers, individually pre-assembled
3 adjustment keys
3 mounting pads
3 screws
6 stoppers
9 T-locks
24 R-locks

Excellent kit 2

kit 102 : width 100 x length 50 x height 7,8 cm

Content of this kit:
3 ramp layers, individually pre-assembled
4 adjustment keys
4 mounting pads
4 screws
12 F-locks
32 R-locks

Excellent kit 102

from 7,8 to 11,4 cm kit 3 : width 75 x length 75 x height 11,4 cm

Content of this kit:
3 ramp layers, individually pre-assembled
3 adjustment keys
3 expansion guides
3 mounting pads
3 screws
12 stoppers
9 T-locks
24 R-locks

Excellent kit 3

kit 103 : width 100 x length 75 x height 11,4 cm

Content of this kit:
3 ramp layers, individually pre-assembled
4 adjustment keys
4 expansion guides
4 mounting pads
4 screws
16 stoppers
12 F-locks
32 R-locks

Excellent kit 103

from 11,4 to 15 cm kit 4 : width 75 x length 100 x height 15 cm

Content of this kit:
3 ramp layers, individually pre-assembled
3 adjustment keys
3 expansion guides
3 mounting pads
3 screws
12 stoppers
9 T-locks
24 R-locks

Excellent kit 4

kit 104 : width 100 x length 100 x height 15 cm

Content of this kit:
3 ramp layers, individually pre-assembled
4 adjustment keys
4 expansion guides
4 mounting pads
4 screws
16 stoppers
12 F-locks
32 R-locks

Excellent kit 104

from
0 to
1,5 cm add-on
Add-on kit 0 : width 75 x length 6,2 x height 1,5 cm

Used for extra height adjustment up to 1,5 cm on Kit 1-4 or as a repair set when re-locating Kit 1-4.

Content of this kit:
3 small ramps
3 adjustment keys
3 mounting pads
3 screws
6 stoppers
16 T-locks
19 R-locks

Excellent Add-on kit 0

Add-on kit 100 : width 100 x length 6,2 x height 1,5 cm

Used for extra height adjustment up to 1,5 cm on Kit 101-104 or as a repair set when re-locating Kit 101-104.

Content of this kit:
4 small ramps
4 adjustment keys
4 mounting pads
4 screws
8 stoppers
16 T-locks
19 R-locks

Excellent Add-on kit 100

catalogue smeyers-tu

Various types for various applications,
Antislip versions (types “S”) for outdoor or for indoor use,
Width: 75 or 100 cm,
Color: grey,
Suitable for wheel chairs but also for trolleys, bicycles and other vehicles.

Stepless Excellent ramp kits are sold as kits.

They are easy to install in 10 to 15 minutes thanks to the enclosed installation guide and accessories for set up and final adjustments. The 2 upper layers are separate to achieve the exact height.

Extremely strong:
not only for wheelchairs but also for carts, tractors, lawn mowers and even a 62 tons weighing Leopard tank. Look at the movie on YouTube (3’30”).

A green and 100% non toxic product:
– made of PELD or PEHD, both polyethylene consisting exclusively of carbon and hydrogen,
– no softeners, such as phthalates or similar compounds,
– no solvents that can be released to the surroundings as VOCs (volatile organic compounds),
– no chlorine, no hydrochloric acid in the event of fire,
– PELD and PEHD can be 100% regenerated.

Built according to EN 12182, 1998: technical aids for disabled people – General requirements and test methods

For Outdoor use with SlipStop
Step height width 75 cm width 100 cm
from 2,4 to 4,2 cm kit 1S : width 75 x length 25 x height 4,2 cm

Content of this kit:
2 ramp layers, individually pre-assembled
3 adjustment keys
3 mounting pads
3 screws
12 R-locks

Excellent kit 1S

kit 101S : width 100 x length 25 x height 4,2 cm

Content of this kit:
4 ramps
4 adjustment keys
4 mounting pads
4 screws
8 F-locks
4 double adhesive tape

Excellent kit 101S

from 4,2 to 7,8 cm kit 2S : width 75 x length 50 x height 7,8 cm

Content of this kit:
3 ramp layers, individually pre-assembled
3 adjustment keys
3 mounting pads
3 screws
6 stoppers
9 T-locks
24 R-locks

Excellent kit 2S

kit 102S : width 100 x length 50 x height 7,8 cm

Content of this kit:
3 ramp layers, individually pre-assembled
4 adjustment keys
4 mounting pads
4 screws
12 F-locks
32 R-locks

Excellent kit 102S

from 7,8 to 11,4 cm kit 3S : width 75 x length 75 x height 11,4 cm

Content of this kit:
3 ramp layers, individually pre-assembled
3 adjustment keys
3 expansion guides
3 mounting pads
3 screws
12 stoppers
9 T-locks
24 R-locks

Excellent kit 3S

kit 103S : width 100 x length 75 x height 11,4 cm

Content of this kit:
3 ramp layers, individually pre-assembled
4 adjustment keys
4 expansion guides
4 mounting pads
4 screws
16 stoppers
12 F-locks
32 R-locks

Excellent kit 103S

from 11,4 to 15 cm kit 4S : width 75 x length 100 x height 15 cm

Content of this kit:
3 ramp layers, individually pre-assembled
3 adjustment keys
3 expansion guides
mounting pads
3 screws
12 stoppers
9 T-locks
24 R-locks

Excellent kit 4S

kit 104S : width 100 x length 100 x height 15 cm

Content of this kit:
3 ramp layers, individually pre-assembled
4 adjustment keys
4 expansion guides
4 mounting pads
4 screws
16 stoppers
12 F-locks
32 R-locks

Excellent kit 104S